DEL/DRIVE® 50-25

A positively driven conveyor belt with 50mm drive teeth on one face and 25mm drive teeth on the other allowing one side to drive and the other to act as low flights for increased grip.

• Homogeneous conveyor belt, (no fabric plies)
• Fully EC-FDA compliant
• Drive teeth across the entire belt width on both sides
• Teeth on both faces of the belt. One side 50mm and the other 25mm
• Maximum width 1200mm
• Flexible and lightweight
• No belt tension
• Resistant to water, detergents, oils and fats
• Very simple joining process

• Homogeneous construction significantly reduces plastic and bacteriological contamination
• Tough PU is resistant to abrasion, cuts, splits and tears
• Full EC-FDA compliance fully satisfies hygiene and safety demands
• Can be used in two configurations:
  • DEL/DRIVE 50 conveyor belt with cleats h=3.5mm with a pitch of 25mm
  • DEL/DRIVE 25 conveyor belt with cleats h=5.5mm with a pitch of 50mm
• Positive drive eliminates the risk of slipping in oily or greasy applications
• Moulded flights aid the conveying of product on inclined applications
• No belt tension allows simpler conveyor designs, reduced costs and improved hygiene
• Resistance to most media means a longer and more hygienic and more durable lifespan
• Simple joining process eliminates high fitting costs and allows self-sufficiency