- Call us: +91 (0)22 4343 4444 |
- info@beltingenterprises.in
Megalinear AT5 Belts
| Belt Characteristics | |||
|---|---|---|---|
| Standard Widths Code (inch) | Weight (gr/m) | ||
| 6 | 20 | ||
| 10 | 35 | ||
| 16 | 50 | ||
| 25 | 80 | ||
| 32 | 105 | ||
| 50 | 165 | ||
| 75 | 245 | ||
| 100 | 340 | ||
%20Megalinear%20Diagram/Diagram/Megalinear%20AT5.png)
Standard compound: white Polyurethane thermoplastic 92 ShA
Standard back cover: none
Standard tooth cover: none
Standard cord: S and Z torsion zinked steel
Standard width tolerance: +/-0.5 mm
Standard thickness: 2.7 +/– 0.2 mm
Standard length tolerance: +/– 0.8 mm/m
HP + HPF cord Length Tolerance: +0/- 0.8 mm/m
Standard roll length: 100 m
Belt options on request with minimum quantity: Nylon fabric back, Nylon fabric teeth, Antistatic nylon fabric, Transparent FDA compound, AVAFC 60/70/85 ShA, APL, Cleats.
Different back coating materials
TOOTH PROFILE ACCORDING ISO 17396
TOOTH RESISTANCE
| RPM (1/min) | 0 | 20 | 40 | 60 | 80 | 100 | 200 | 300 | 400 | 500 | 750 | 1000 | 1500 | 2000 | 3000 | 4000 | 5000 | 8000 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fp spec (N/cm) | 35 | 35 | 35 | 34 | 34 | 34 | 32 | 31 | 30 | 29 | 27 | 26 | 24 | 22 | 19 | 18 | 16 | 13 |
| |
Minimum suggested number of teeth in clamp for linear movement: 7 - HP/HPF cords minimum suggested number of teeth in clamp 10 | |||||||||||||||||
TRACTION RESISTANCE
| Belt width (mm) | 6 | 10 | 16 | 25 | 32 | 50 | 75 | 100 | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Max Traction Load (N) | 400 | 670 | 1070 | 1805 | 2275 | 3750 | 5145 | 6910 | |
| Breaking Strength (N) | 1605 | 2680 | 4285 | 7235 | 9110 | 15005 | 19560 | 26260 | ||
| Elongation at MTL (mm/m) | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | ||
| Kevlar | Max Traction Load (N) | 395 | 665 | 1060 | 1795 | 2260 | 3720 | 5110 | 6860 | |
| Breaking Strength (N) | 1595 | 2660 | 4255 | 7180 | 9040 | 14895 | 19415 | 26065 | ||
| Elongation at MTL (mm/m) | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | ||
| HP | Max Traction Load (N) | – | 840 | 1470 | 2415 | 3045 | 5040 | – | – | |
| Breaking Strength (N) | – | 3360 | 5880 | 9660 | 12180 | 20160 | – | – | ||
| Elongation at MTL (mm/m) | – | 4 | 4 | 4 | 4 | 4 | – | – | ||
| HF | Max Traction Load (N) | – | 685 | 1100 | 1855 | 2335 | 3850 | – | – | |
| Breaking Strength (N) | – | 2750 | 4400 | 7425 | 9350 | 15400 | – | – | ||
| Elongation at MTL (mm/m) | – | 5 | 5 | 5 | 5 | 5 | – | – | ||
| HPF | Max Traction Load (N) | – | 880 | 1540 | 2530 | 3190 | 5280 | – | – | |
| Breaking Strength (N) | – | 3520 | 6160 | 10120 | 12760 | 21120 | – | – | ||
| Elongation at MTL (mm/m) | – | 5 | 5 | 5 | 5 | 5 | – | – | ||
| Stainless | Max Traction Load (N) | 310 | 520 | 835 | 1410 | – | – | – | – | |
| Breaking Strength (N) | 1250 | 2090 | 3340 | 5640 | – | – | – | – | ||
| Elongation at MTL (mm/m) | 3.8 | 3.8 | 3.8 | 3.8 | – | – | – | – | ||
| Average values | ||||||||||
