Ultimate Hygiene Mono-Material belts are manufactured by Mafdel for safe food processing. To cater variety of applications, Mafdel produced a wide range of conveyor and positive belts meeting stringent hygiene requirements. It can also replace conveniently existing Plastic Modular belts and Fabric Conveyor Belts.
Welding of a positively driven conveyor belt DEL/DRIVE
All Mafdel conveyor belts (except DEL/SYNC) can be welded endless using a dedicated joining press and welding blade.
Using the tools is simple, quick and easy and allows you to weld both in the workshop or on site.
We offer a full range of locating plates for use with the belt press for each type of positive drive belt so that correct tooth pitch is maintained at the weld
The DEL/SYNC belt is joined in a press after having the joint cut using a specific tool.
If required, all mono-material belts (except DEL/ROC) can also be welded using this procedure.
Hot air welding makes it possible to weld smooth belts using a welded seam.
This welding method also lets you weld profiles and repair belts on site if they have been damaged.
Stainless steel clips can be used where there is a need to regularly remove the belt for cleaning or maintenance.
They are suitable for all widths and belts that are 1.5 to 5 mm thick. Assembly requires tools and appropriate clips. (Not all clips are suitable).
Moulded plastic joints are suitable for all Polyurethane and polyester mono-material belts of all widths. They are recommended for roller diameters greater than 120 mm.
Applying plastic clips allows for the belts to be used with metal detectors and prevents the risk of metal contamination
