- Call us: +91 (0)22 4343 4444 |
- info@beltingenterprises.in
Megalinear XL Belts
| Belt Characteristics | |||
|---|---|---|---|
| STANDARD WIDTHS CODE (inch) | STANDARD WIDTHS (mm) | Weight (gr/m) | |
| 25 | 6.35 | 15 | |
| 37 | 9.53 | 20 | |
| 50 | 12.7 | 30 | |
| 75 | 19.05 | 45 | |
| 100 | 25.4 | 60 | |
| 150 | 38.1 | 90 | |
| 200 | 50.8 | 120 | |
%20Megalinear%20Diagram/Diagram/Megalinear%20XL.png)
Standard compound: white Polyurethane thermoplastic 92 ShA
Standard back cover: none
Standard tooth cover: none
Standard cord: S and Z torsion zinked steel
Standard width tolerance: +/-0.5 mm
Standard thickness: 2.3 +/– 0.3 mm
Standard length tolerance: +/– 0.8 mm/m
Standard roll length: 100 m
Belt options on request with minimum quantity: Nylon fabric back, Nylon fabric teeth, Antistatic nylon fabric, Transparent FDA compound, AVAFC 60/70/85 ShA, APL, Cleats.
Different back coating materials
TOOTH PROFILE ACCORDING ISO 5296-1
TOOTH RESISTANCE
| RPM (1/min) | 0 | 20 | 40 | 60 | 80 | 100 | 200 | 300 | 400 | 500 | 750 | 1000 | 1500 | 2000 | 3000 | 4000 | 5000 | 8000 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fp spec (N/cm) | 19 | 19 | 18 | 18 | 17 | 17 | 16 | 15 | 15 | 14 | 13 | 13 | 12 | 11 | 10 | 9 | 8 | 7 |
| Minimum suggested number of teeth in clamp for linear movement: 7 | ||||||||||||||||||
TRACTION RESISTANCE
| Belt width (inch) | 25 | 37 | 50 | 75 | 100 | 150 | 200 | |
|---|---|---|---|---|---|---|---|---|
| Steel | Max Traction Load (N) | 155 | 250 | 375 | 625 | 840 | 1310 | 1750 |
| Breaking Strength (N) | 625 | 1000 | 1500 | 2500 | 3375 | 5250 | 7000 | |
| Elongation at MTL (mm/m) | 4 | 4 | 4 | 4 | 4 | 4 | 4 | |
| Kevlar | Max Traction Load (N) | 210 | 335 | 505 | 845 | 1140 | 1775 | 2365 |
| Breaking Strength (N) | 845 | 1350 | 2025 | 3380 | 4565 | 7100 | 9465 | |
| Elongation at MTL (mm/m) | 8 | 8 | 8 | 8 | 8 | 8 | 8 | |
| Stainless | Max Traction Load (N) | 85 | 140 | 210 | 355 | 480 | – | – |
| Breaking Strength (N) | 355 | 570 | 855 | 1425 | 1920 | – | – | |
| Elongation at MTL (mm/m) | 3.8 | 3.8 | 3.8 | 3.8 | 3.8 | – | – | |
| Average values | ||||||||
