- Minimum splice length 900 mm
- Traction and tooth resistances = 50% less than open-end
- Joined belt can be used only in conveyor systems
- Rolls with NFT, and NFB can be joined too
- Minimum diameters according above table
- We also give truly endless megaflex belt for this application
- This belt offer 50% more strength compare to normal jointed belt
- We also can offer in the steel cord
- Call us: +91 (0)22 4343 4444 |
- info@beltingenterprises.in
MEGALINEAR TT5 FOR KNITTING MACHINE
| Belt Characteristics | |||
|---|---|---|---|
| Standard Widths (mm) | Weight (gr/m) | ||
| 10 | 20 | ||
Standard compound: blue Polyurethane thermoplastic 88 ShA
Standard back cover: none
Standard tooth cover: none
Standard cords: S and Z torsion kevlar
Standard width tolerance: +/– 0.5 mm
Standard thickness: 2.8 +/– 0.15 mm
Standard length tolerance: +/– 0.8 mm/m
Standard roll length: 100 m
TOOTH PROFILE ACCORDING ISO 17396
TOOTH RESISTANCE
| RPM (1/min) | 0 | 20 | 40 | 60 | 80 | 100 | 200 | 300 | 400 | 500 | 750 | 1000 | 1500 | 2000 | 3000 | 4000 | 5000 | 8000 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fp spec (N/cm) | 24 | 23 | 23 | 22 | 22 | 22 | 20 | 19 | 19 | 18 | 17 | 16 | 15 | 14 | 12 | 11 | 11 | 9 |
TRACTION RESISTANCE
| Belt width (mm) | 10 | |
|---|---|---|
| Kevlar | Max Traction Load (N) | 795 |
| Breaking Strength (N) | 3190 | |
| Elongation at MTL (mm/m) | 8 | |
| Average values | ||
JOINED BELT INFORMATION
