- Call us: +91 (0)22 4343 4444 |
- info@beltingenterprises.in
Megalinear L Belts
| Belt Characteristics | |||
|---|---|---|---|
| Standard Widths Code (inch) | Standard Widths (mm) | Weight (gr/m) | |
| 37 | 9.53 | 35 | |
| 50 | 12.7 | 45 | |
| 75 | 19.05 | 65 | |
| 100 | 25.4 | 90 | |
| 150 | 38.1 | 135 | |
| 200 | 50.8 | 180 | |
| 400 | 101.6 | 325 | |
%20Megalinear%20Diagram/Diagram/Megalinear%20L.png)
Standard compound: white Polyurethane thermoplastic 92 ShA
Standard back cover: none
Standard tooth cover: none
Standard cord: S and Z torsion zinked steel
Standard width tolerance: +/-0.5 mm
Standard thickness: 3.6 +/– 0.3 mm
Standard length tolerance: +/– 0.8 mm/m
Standard roll length: 100 m
Belt options on request with minimum quantity: Nylon fabric back, Antistatic nylon fabric, Transparent FDA compound, AVAFC 60/70/85 ShA, APL, Cleats.
Different back coating materials
TOOTH PROFILE ACCORDING ISO 5296-1
TOOTH RESISTANCE
| RPM (1/min) | 0 | 20 | 40 | 60 | 80 | 100 | 200 | 300 | 400 | 500 | 750 | 1000 | 1500 | 2000 | 3000 | 4000 | 5000 | 8000 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fp spec (N/cm) | 37 | 36 | 35 | 35 | 34 | 33 | 31 | 29 | 28 | 27 | 24 | 23 | 20 | 19 | 16 | 15 | 13 | 11 |
| Minimum suggested number of teeth in clamp for linear movement: 7 | ||||||||||||||||||
TRACTION RESISTANCE
| Belt width (inch) | 37 | 50 | 75 | 100 | 150 | 200 | 400 | |
|---|---|---|---|---|---|---|---|---|
| Steel | Max Traction Load (N) | 600 | 800 | 1340 | 1805 | 2810 | 3750 | 7500 |
| Breaking Strength (N) | 2410 | 3215 | 5360 | 7235 | 11255 | 15005 | 26260 | |
| Elongation at MTL (mm/m) | 4 | 4 | 4 | 4 | 4 | 4 | 4 | |
| Kevlar | Max Traction Load (N) | 595 | 795 | 1330 | 1795 | 2790 | 3720 | 7445 |
| Breaking Strength (N) | 2390 | 3190 | 5320 | 7180 | 11170 | 14895 | 26065 | |
| Elongation at MTL (mm/m) | 8 | 8 | 8 | 8 | 8 | 8 | 8 | |
| Stainless | Max Traction Load (N) | 470 | 625 | 1045 | 1410 | – | – | – |
| Breaking Strength (N) | 1880 | 2505 | 4180 | 5640 | – | – | – | |
| Elongation at MTL (mm/m) | 3.8 | 3.8 | 3.8 | 3.8 | – | – | – | |
| Average values | ||||||||
