- Call us: +91 (0)22 4343 4444 |
- info@beltingenterprises.in
Megalinear T2.5 Belts
| Belt Characteristics | |||
|---|---|---|---|
| Standard Widths Code (inch) | Weight (gr/m) | ||
| 10 | 14 | ||
| 16 | 23 | ||
| 20 | 28 | ||
%20Megalinear%20Diagram/Diagram/Megalinear%20T2.5.png)
Standard compound: white Polyurethane thermoplastic 92 ShA
Standard back cover: none
Standard tooth cover: none
Standard cord: One torsion zinked steel
Standard width tolerance: +/-0.3 mm
Standard thickness: 1.3 +/– 0.15 mm
Standard length tolerance: +/– 0.8 mm/m
Standard roll length: 100 m
TOOTH PROFILE ACCORDING ISO 17396
TOOTH RESISTANCE
| RPM (1/min) | 0 | 20 | 40 | 60 | 80 | 100 | 200 | 300 | 400 | 500 | 750 | 1000 | 1500 | 2000 | 3000 | 4000 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fp spec (N/cm) | 9 | 8.7 | 8.4 | 8.2 | 8.1 | 7.9 | 7.3 | 7 | 6.7 | 6.4 | 6 | 5.7 | 5.2 | 4.9 | 4.4 | 4 |
| Minimum suggested number of teeth in clamp for linear movement: 7 | ||||||||||||||||
TRACTION RESISTANCE
| Belt width (mm) | 10 | 16 | 20 | |
|---|---|---|---|---|
| Steel | Max Traction Load (N) | 105 | 170 | 215 |
| Breaking Strength (N) | 435 | 695 | 870 | |
| Elongation at MTL (mm/m) | 4 | 4 | 4 | |
| Average values | ||||
